Recalling A Job Program - Xerox WorkCentre C226 User Manual

Copier Operation
NOTE:

Recalling a job program

2-74
4. Make all copier selections to be stored.
To Store, Make Selections And Press
[OK], To Delete, Press [Cancel].
Special Modes
2-Sided Copy
A4
Duplex
Output
A4
A3
5. Touch the [OK] key.
And Press
Cancel OK
ncel].
Auto
Original
Auto
Plain
Exposure
B5
Auto A4
A4
Paper Select
Duplex
A4
100 %
A3
Copy Ratio
If a number key is selected in step 3 that has already been programmed.
A setting confirmation screen will appear. To replace the existing program with the
new program, touch the [STORE] key and continue from step 4. If you do not wish
to replace the existing program, touch the [CANCEL] key to return to the screen of
step 3 and select a different number key.
If overwriting of programmed copy settings has been prohibited in the key operator
programs, you will not be able to store a job program.
1. Press the [#/P] key.
2. Touch the desired storage register number key to recall the job from memory.
Job Programs
Press Program Number.
Recall
The number of copies cannot be stored.
Pla
B
The selected settings will be stored under the register
number selected in step 3.
When a number key is touched, the selection screen will
be closed and the stored job program will be recalled. A
number for which no job program has been stored can-
not be selected.
Xerox WorkCentre C226 User Guide