Xerox WorkCentre C226 User Manual page 352

Fax Unit
NOTES:
NOTE:
5-24
EXPOSURE
Standard
Resolution
Auto A4
Original
6. Continue from step 4 of "Basic Procedure for Sending Faxes" (page 5-20).
• Booklets and tablets
• Two-sided originals that are bound at the
side are booklets, and two-sided originals
that are bound at the top are tablets.
• Two-sided scanning turns off after the
document is stored in memory. Pressing the
[CLEAR ALL] key will also cancel two-sided
scanning.
Quick On-line
When you use the DADF to send a multi-page document and there are no previously
stored jobs waiting or in progress (and the line is not being used), the machine dials
the destination after the first page is scanned and begins transmitting scanned pages
while the remaining pages are being scanned. This transmission method is called
Quick On-line. The messages "SCANNING ORIGINAL." and "SENDING." both appear
until scanning of the final page is completed.
If the receiving party is busy, the transmission will switch to a memory transmission.
(Refer to the following section, "Storing transmission jobs (memory transmission)".)
The machine is initially set (factory setting) to perform Quick On-line transmission. If
desired, you can turn off this function with the key operator program.
When a document is transmitted using the following methods, the job will be stored in
memory (Quick On-line transmission will not be performed):
• Sending from the document glass l broadcast transmission (page 5-30)
• Timer transmission (page 5-32)
• F-code transmission (page 5-49)
Storing transmission jobs (memory transmission)
When a document is sent from the document glass, or when the telephone line is in
use, the document is scanned into memory and then automatically transmitted after
previously stored transmission jobs are completed. (This is called memory transmis-
sion.) This means that transmission jobs can be stored in memory by performing a
transmission operation while the machine is occupied with another transmission/
reception operation. This is called storing transmission, and up to 50 jobs can be
stored in memory at once. After transmission, the scanned document data is cleared
from memory.
A two-sided original icon appears next to the [ORIGI-
NAL] key.
Example:
The icon that appears when the [2-SIDED BOOKLET]
key is touched.
Xerox WorkCentre C226 User Guide
Booklet Tablet