Xerox WorkCentre C226 User Manual page 80

General Information
1-54
4. Close the upper cover of the Duplex Bypass/Inverter Unit.
5. Lift the exit tray if one is installed and open the cover of the Duplex Bypass/
Inverter Unit.
6. Remove the misfed paper.
7. Close the cover of the Duplex Bypass/Inverter Unit and return the exit tray to its
original position.
8. Remove a misfeed from the bottom of the Duplex Bypass/Inverter Unit.
While holding the exit tray up, remove the misfed paper
as shown in the illustration. Be careful not to tear the
misfed paper during removal.
Gently remove the misfed paper from the bottom of the
Duplex Bypass/Inverter Unit as shown in the illustration,
taking care not to tear the paper.
Xerox WorkCentre C226 User Guide