Device Setup - Xerox WorkCentre C226 User Manual

Xerox WorkCentre C226 User Guide
Group
Multiple e-mail destinations can be stored in one of the one-touch keys displayed
in the touch panel. This is called storing a group. When sending an e-mail, the
stored destinations can be selected by simply touching the one-touch key. This is
convenient when you wish to send the same e-mail to multiple destinations.
Sender
The sender of E-mail transmissions from the network scanner is configured. The
sender will be set as the "From" item of the E-mail header. Up to 20 senders can be
registered and a sender can be selected among them from the operation panel.
Network Scanning
Setup
Basic setting screen for the network scanner. E-mail subject for scanner delivery,
file name, etc. are set. To use the network scanner, you must set up SMTP Setup
and DNS Setup. This screen displays the SMTP and DNS settings and provides a
link to SMTP Setup and DNS Setup.
Custom Directory
User index names in the display list on the operation panel are set.

Device Setup

Information
Configure machine identification information for the status & alert E-mail function.
Password
The settings and programmed information in the Web page can be protected by click-
ing [Passwords] in the menu frame and establishing passwords. The administrator
should change the initial password set at the factory to a new password. In addition,
take care to remember the new password, as it must be entered the next time you
open the Web page.
Two types of passwords can be established: one for users and one for the administra-
tor.
When the Web page is accessed using the user password, the "Device Setup" and
"Network Setup" cannot be configured.
The password is initially set to "Xerox". When you first establish the passwords, enter
"Xerox" in "Administrator Password" and then enter the new password for the adminis-
trator and the password for users (maximum of 7 characters per password; passwords
are case sensitive). Click [Submit] to save the new passwords. After setting the new
passwords, turn off and then turn on the machine power.
The next time you open the Web page, you will be prompted to enter your password.
When accessing the Web page as a user, enter "user" in "User Name". When access-
ing the Web page as an administrator, enter "admin" in "User Name".
Printer Configuration Through the Network
3-43