Sharpness - Xerox WorkCentre C226 User Manual

Sharpness

Xerox WorkCentre C226 User Guide
4. Touch the [OK] key (inside [OK] key) on the RGB ADJUST setting screen.
Return to the COLOUR ADJUSTMENTS menu screen.
5. Touch the [OK] key on the COLOUR ADJUSTMENTS menu screen.
Return to the SPECIAL MODES screen.
6. Touch the [OK] key on the SPECIAL MODES screen.
Return to the main screen of copy mode.
About the steps that follow
If a DADF is being used, see pages 2-13 through 2-19. If the document glass is being
used, see pages 2-21 through 2-24.
In either case, press the [COLOUR COPY START] key to begin copying.
To cancel the RGB ADJUST function, select the RGB ADJUST function again and
touch the [CANCEL] key (step 2 or 3).
Sharpens or softens image outlines.
1. Touch the [SHARPNESS] key on the COLOUR ADJUSTMENTS menu screen.
t Sharpness
Brightness
2. Touch the [SOFT] key to soften image outlines or touch the [SHARPEN] key to
sharpen them.
Colour
Adjustments
Sharpness
Soft
3. Touch the [OK] key (inside [OK] key) on the SHARPNESS setting screen.
Return to the COLOUR ADJUSTMENTS menu screen.
The SHARPNESS setting screen will appear. The colour
adjustments icon (
of the screen to indicate that the function is turned on.
Su
Bac
Int
OK
Cancel OK
Sharp
Colour Adjustments Menu
) will also appear in the upper left
2-53