Xerox WorkCentre C226 User Manual page 376

Fax Unit
/
int
gs
NOTES:
5-48
Transferring received data
1. Press the [CUSTOM SETTINGS] key.
2. Touch the [FAX DATA FORWARD] key.
Clock
ive Fax Data
Forward
3. Touch the [YES] key.
Transfer The Received Data To Another
Device?
No Yes
• To cancel transfer
Press the [JOB STATUS] key, and then cancel the transfer in the same way as a
transmission. (See "Cancelling a Fax Transmission" on page 5-27.)
The data that was going to be transferred will return to print standby status in your
machine.
• If the transfer is not possible because the line is busy or a transmission error
occurs, the data returns to print standby status in your machine.
If there is no data to transfer or a transfer number has not
been programmed (See the "Fax Unit" section of the
WorkCentre C226 System Administration Guide.), a
message will appear and transfer will not be possible.
The machine automatically dials the transfer destination
programmed with the key operator program and begins
transfer.
If you do not wish to transfer the data, touch the [NO] key.
Xerox WorkCentre C226 User Guide