Transferring Received Faxes to Another Machine When Printing Is Not Possible (Forwarding Function)
NOTES:
Using the Transfer Function
Xerox WorkCentre C226 User Guide
•
When the transfer instruction is issued, all data that has been received in memory
to that point is transferred. The page that was being printed when the problem
occurred and all following pages will be transferred.
•
Data cannot be selected for transfer. Data received to a confidential memory box
cannot be transferred. (See "F-Code Confidential Transmission" on page 5-56.)
•
The result of transfer is indicated on an activity report. (See ""Viewing the
Communication Activity Report" on page 5-98.)
Program the fax number of the transfer destination
Use the key operator program to program the number of the transfer destination. (See
the "Fax Unit" section of the WorkCentre C226 System Administration Guide.) Only
one fax number can be programmed. The transfer function cannot be used unless a
number is programmed.
5-47