Originals That Can Be Faxed - Xerox WorkCentre C226 User Manual

Fax Unit

Originals that Can Be Faxed

NOTE:
Using the DADF
Using the document
glass
NOTE:
Faxed document
width
A3 (11"x17")
A3 (11"x17")
5-10
Original sizes
In table below, width is the first measurement, and length is the second.
Minimum original size
• A5: 210 mm x 148 mm
• 8-1/2" x 5-1/2"
• A5R: 148 mm x 210 mm
• 5-1/2" x 8-1/2"
Originals that are not a standard size (A5, B5, B5R, A4, A4R, B4, A3, 5-1/2"x8-1/2", 8-
1/2"x11", 8-1/2"x11"R, 8-1/2"x14", 11"x17") can also be faxed.
Scanning area of original
Note that the edges of an original cannot be
scanned.
Area that cannot be scanned:
2mm ± 2mm from the edges of the original.
Automatic reduction of faxed document
If the size (width) of the faxed document is greater than the receiving machine's paper
size, the size will be automatically reduced.
Receiving machine's
paper width
B4 (8-1/2"x14")
A4 (8-1/2"x11")
A document can also be faxed without reducing its size. In this case, the left and right
edges will not be transmitted.
Maximum original size
297 mm x 800 mm*
11" x 31-1/2"*
* Long documents can be loaded.
297 mm x 432 mm
11" x 17"
Reduced size
B4 (8-1/2"x14")
A4R (8-1/2"x11"R)
Xerox WorkCentre C226 User Guide
Ratio (Area ratio)
1 : 0.78 (1 : 0.64)
1 : 0.5 (1 : 0.5)