Xerox WorkCentre C226 User Manual page 407

NOTE:
Xerox WorkCentre C226 User Guide
2. Touch the [SETTINGS] key.
No.1
Program For Xerox
Program Name
Address
Settings
Resolution
Special
Modes
3. Touch the keys as appropriate to store the frequently used settings.
Enter Program You Require.
Auto
Exposure
Standard
Resolution
For the detailed procedures for each of the settings, refer to the explanations of
those features on the following pages.
• [RESOLUTION](page 5-14)
• [EXPOSURE](page 5-16)
• [ADDRESS DIRECTORY] (page 5-30)
• [SPECIAL MODES]
• POLLING (page 5-36)
• DUAL PAGE SCAN (page 5-44)
Up to 100 destinations can be stored in a program. However, you cannot directly enter
fax numbers with the numeric keys. A destination must be programmed in an auto dial
key (one-touch key or group key) before it can be stored in a program.
4. Touch the [OK] key.
Your settings are displayed. Make sure they are correct.
Program
No.1 Registration Is Completed.
Program For Xerox
Program Name
Address
Settings
Resolution
Special
Modes
5. When you are finished, touch the [EXIT] key.
If you wish to store another program, touch the [NEXT] key.
Touching the [EXIT] key returns you to the screen of step 4 on page 5-67.
Touching the [NEXT] key returns you to the screen of step 1.
Storing, Editing, and Deleting Auto Dial Keys and Programs
Ok
Cancel
Address
Directory
Special Modes Address Review
Next Exit
2 Addresses
Dark
Fine Exposure Original
Dual Page
Scan
5-79