Xerox WorkCentre C226 User Manual page 144

Copier Operation
2-40
1. Touch the [MARGIN SHIFT] key on the SPECIAL MODES screen.
Margin Shift
Centring
2. Select the shift direction.
Right Left
3. Set the shift amount as needed and touch the lower [OK] key.
OK
Cancel OK
Side 1 Side 2
(0 20) (0 20)
10 10
mm mm
4. Touch the [OK] key on the SPECIAL MODES screen.
Return to the main screen of copy mode.
About the steps that follow
If a DADF is being used, see pages 2-13 through 2-19. If the document glass is being
used, see pages 2-21 through 2-24.
To cancel the margin shift function, touch the [CANCEL] key on the margin shift setting
screen. This must be done before you touch [OK] in step 4.
The margin shift setting screen will appear.
The margin shift icon (
left of the screen to indicate that the function is turned
on.
Touch a shift direction key to select right or left. The
selected key will be highlighted.
Use the and the keys to set the shift amount. The
shift amount can be set from 0 to 20 mm in 1 mm incre-
ments.
If a Duplex Module/2-Tray Unit and Duplex Bypass/
Inverter Unit are not installed, the margin shift setting for
back-side copies will not be displayed.
Xerox WorkCentre C226 User Guide
) will also appear in the upper