Procedure For Using Key Operator Programs - Xerox WorkCentre C226 User Manual

Printer Operation

Procedure for using key operator programs

3-52
The procedure for using key operator programs is explained here, using the
"PRINTER SETTINGS" program as an example.
Follow the same steps to use the programs explained on page 3-55 and following.
1. Press the [CUSTOM SETTINGS] key.
/
2. Touch the [KEY OPERATOR PROGRAMS] key.
Address ADDRESS
Receive Mode
CONTROL
Control
Key Operator Programs
3. Use the numeric keys to enter the five-digit key operator code number.
Key Operator Code
4. Touch the [PRINTER SETTINGS] key.
Printer
Settings
Key Operator
5. Make desired settings for the selected program.
Detailed descriptions for program settings start on page 3-55.
Follow these steps to select the program that you wish to
use.
In the following steps, the setting screens for the
selected program will appear. Refer to the program
explanations on page 3-55 and following, and then fol-
low these steps to select a setting for the program.
Xerox WorkCentre C226 User Guide