Xerox WorkCentre C226 User Manual page 64

General Information
1-38
Tray settings
For the detailed descriptions and use of the settings listed below, see
Chapter 5, "Fax Unit" and Chapter 4, "Network Scanner Operation".*
Address control
Receive mode
Fax data forward
Keyboard select
Key operator program These are programs that are used by the key operator
* These settings can be configured if the fax function or network scanner function is
available.
The paper type, paper size and automatic tray switching can
be set for each tray. Automatic tray switching allows feeding
to switch between trays loaded with the same type and size
of paper. If one tray runs out of paper during printing, printing
will continue from the other tray. (See page 1-41.)
Use this to store fax destinations (fax numbers). This is
also used to store groups, memory boxes, and user
indexes.
If the network scanner function is available, e-mail
addresses, user indexes, and scanner senders can
also be stored.
Use this to configure fax reception settings (auto/man-
ual).
Faxes received to memory can be forwarded to another
destination.
When using the fax function or network scanner func-
tion, you can switch the arrangement of the letter keys
in the display keyboard used for storing and editing
destinations in the English character entry screen.
(administrator of the machine) to configure machine set-
tings. A key appears for these settings in the custom set-
tings menu screen. For information on these settings, see
"Key Operator Programs" in the WorkCentre C226 System
Administration Guide.
Xerox WorkCentre C226 User Guide