Scanning And Transmitting A Two-Sided Original - Xerox WorkCentre C226 User Manual

Network Scanner Operation

Scanning and Transmitting a Two-sided Original

4-32
7. Select the destination type.
To CC
tanaka
tanaka a
tanaka b
8. If you wish to enter another address, repeat steps 6 and 7.
For Scan to FTP, multiple destinations cannot be specified.
9. Touch the [CONDITION SETTINGS] key.
Condition
Settings
Detail
Address Review
bcd.c
Search Again
bcd.c
A two-sided original can be automatically scanned and transmitted using the DADF.
Follow the steps below.
1. Make sure the machine is in scanner mode and then load the document in the
DADF.
2. Touch the [ORIGINAL] key.
Lower
Resolution
Programmed
File Format
Auto A4
Original
3. Touch the [2-SIDED BOOKLET] key or the [2-SIDED TABLET] key as appropriate
for the original you loaded.
Size
OK
Manual
2-Sided 2-Sided
Booklet Tablet
Normally touch the [TO] key. However, if you are per-
forming a broadcast transmission and wish to "CC" or
"BCC" the document to the entered address, touch the
[CC] or [BCC] key.
tana
tana
You will return to the condition setting screen.
When you touch the [ORIGINAL] key, check the original
size displayed in the key.
If necessary, touch the [MANUAL] key and set the origi-
nal size. (page 4-34)
Xerox WorkCentre C226 User Guide