Basic Operations; Sending A Fax; Basic Procedure For Sending Faxes - Xerox WorkCentre C226 User Manual

Sending a Fax

Basic Procedure for Sending Faxes

NOTE:
Xerox WorkCentre C226 User Guide

Basic Operations

This section explains basic operations such as sending and receiving faxes.
1. Make sure the machine is in fax mode.
/
FAX] key (see page 5-7).
2. Load the original.
• Using the DADF: page 5-11
• Using the document glass: page 5-11
If you are using the document glass to send multiple pages, load the first page first.
You cannot load documents in both the DADF tray and on the document glass and
send them in a single fax transmission.
3. Check the original size.
EXPOSURE
Standard
Resolution
Auto A4
Original
When the [IMAGE SEND] key light is on, the machine is
in fax mode. If the light is not on, press the [IMAGE
SEND] key.
When the network scanner option is installed, touch this
key to return to the initial screen of fax mode or scanner
mode, whichever mode was selected last. To switch to
fax mode from scanner mode, touch the [SCANNER/
If the address directory screen appears, touch the [CON-
DITION SETTINGS] key to display the condition settings
screen.
If the original is not a standard size or the size was not
detected correctly, touch the [ORIGINAL] key to specify
the original size. (See "Manually Setting the Scanning
Size" on page 5-13.)
Sending a Fax
5-19