Xerox WorkCentre C226 User Manual page 403

NOTE:
Xerox WorkCentre C226 User Guide
3. Touch one-touch keys of the destinations that you wish to store in the group.
Touch index keys and the
Direct Address / Group
Select Address.
A B
C Group Xerox Corporation
Corpo.Tps
Frequent Use ABCD EFGHI JKLMN
• One-touch keys that have been touched are highlighted.
• If you touch the wrong key, simply touch it again to cancel the highlighting and
remove the destination from the group.
Keys that are greyed out are group keys. Group keys cannot be selected.
• To check the destinations that you have stored in the group, touch the
[ADDRESS REVIEW] key.
N
Address Review
OPQRST UVWXYZ
ABC Group
4. Touch the [OK] key in the screen of step 3.
You will return to the screen of step 2. The number of selected destinations will
appear next to the [ADDRESS] key.
5. Check the name of the key (refer to step 13 on page 5-71).
The characters appearing next to the [KEY NAME] key will be displayed in the
group key. To change these characters, touch the [KEY NAME] key. This step is
not necessary if you do not wish to change the characters.
The procedure for entering characters is explained on page 5-90.
6. Touch the [EXIT] key when you have finished programming the group key.
If you wish to program another group key, touch the [NEXT] key.
When you touch the [EXIT] key, you will return to the screen of step 4 on page 5-
67.
To store another group, touch the [NEXT] key.
Storing, Editing, and Deleting Auto Dial Keys and Programs
keys as needed.
Address Review
OPQRST UVWXYZ ABC Group
A list of the destinations appears.
To delete a destination, touch the key of the destination
and then touch the [YES] key in the message that
appears.
5-75