Xerox WorkCentre C226 User Manual page 133

NOTE:
NOTE:
Xerox WorkCentre C226 User Guide
2. Touch the appropriate key in the Paper Select display to select the desired paper
size.
1. A4 Recycled
2. A3 Plain
3. A4R
Plain
If paper of the desired size is not loaded in any tray, load paper of the required size in
a paper tray or the Bypass Tray.
3. On the Copy Ratio display, touch the [More...] key.
4. Touch the [AUTO IMAGE] key.
5. Touch [OK].
The [AUTO IMAGE] key will be highlighted and the best reduction or enlargement ratio
for the original size and the selected paper size will be selected and displayed in the
copy ratio display.
If the message "ROTATE ORIGINAL FROM
orientation of the original as indicated in the message. When the message above is
displayed, copying can be done without changing the orientation, but the image will
not fit the paper correctly.
6. Use the numeric keys to set the desired number of copies.
Use the [C] (clear) key to cancel an entry if a mistake has been made.
TO
Up to 999 can be set.
If you are only making a single copy, the copy can be
made with the copy number display showing "0".
Reduction/Enlargement/Zoom
" is displayed, change the
2-29