Programming; Storing, Editing, And Deleting Auto Dial Keys And Programs - Xerox WorkCentre C226 User Manual

Fax Unit

Storing, Editing, and Deleting Auto Dial Keys and Programs

NOTE:
/
5-66

Programming

This section explains the procedures for programming and the information pro-
grammed in auto dial keys (one-touch and group keys), programs, user indexes, and
memory boxes.
Auto dial keys (one-touch keys and group keys), user indexes, and memory boxes are
stored, edited and deleted at the operation panel of the machine. This section explains
the procedures for storing, editing, and deleting using the operation panel.
This section explains the procedures for storing, editing, and deleting auto-dial keys
(one-touch keys and group keys) and programs, which simplify the transmission pro-
cedure. (The procedure for using one-touch keys and group keys is explained in
"Transmission by Auto-Dialing (One-Touch Dialing and Group Dialing)" on page 5-22
and the procedure for using programs is explained in "Using a Program" on page 5-
45.)
A combined total of 500 one-touch keys and group keys can be stored, and eight pro-
grams can be stored. If you attempt to store more than this, a warning message will
appear. In this case, delete any auto-dial keys or programs that are no longer needed
(one-touch keys: page 5-72; group keys: page 5-76; programs: page 5-80), and then
store the new auto-dial key or program.
To cancel a storing, editing, or deleting operation, press the [CLEAR ALL] key. You will
return to the initial screen.
To store, edit, or delete an auto-dial key (one-touch key or group key) or program, first
follow steps 1 through 4 below. In the screen of step 4, touch the appropriate key for
storing, editing, or deleting.
1. Press the [CUSTOM SETTINGS] key.
Xerox WorkCentre C226 User Guide