Registering Stored Program (Build Job) - Xerox 4110 User Manual

X er o x 4 5 90 / 4110 C o pi e r /P r i n te r U s er G u i de

Registering Stored Program (Build Job)

Stored program for Build Job can record up to 40 features. In
addition, up to 100 actions can be registered with a stored
program.
The procedure for registering actions with a Stored Program is
detailed below.
KEY POINT: There are two situations where a stored program
may become invalid:
- when default values or paper tray settings are changed in the
system setting
- when buttons are added or removed from the touch screen since
stored programming only remembers the location of a button on
the screen, not the name of the button.
Button positions can change when, after a stored program is
registered, a job flow, job template, or recipient, for example, is
added or deleted.
NOTE: If the Interrupt button is pressed, if the Auto Reset feature
causes a time-out, or if a popup window (paper jam, for example)
appears, then the Stored Program record operation is cancelled.
From the All Services screen, select Setup Menu and then
1.
Stored Program. Select Store Build Job.
Select the number to register.
2.
NOTE: Once a job is stored to a button, it cannot be overwritten.
Select
display the next screen.
Set the feature you wish to register.
3.
NOTE: A tone is generated while registering to job memory.
Press the Start button or Clear All button.
4.
The steps are stored. Select Close. You may wish to rename
5.
the Stored Program. See "Naming/Renaming a Stored
Program" on page 6-7 for more information.
to display the previous screen and select
6 . St or ed P r o gr a m mi n g
to
6-5