Xerox WorkCentre C226 User Manual page 45

NOTES:
Xerox WorkCentre C226 User Guide
Using the machine when the auditing mode is enabled
The procedure for using the machine for copying functions when the Auditing Mode
has been enabled for the copier functions is explained below.
• When the account counter is turned on for fax or network scanner functions, a
message will appear prompting you to enter your account number each time the
touch panel is changed to the main screen of the function. Enter your account
number as explained below and then proceed with the job.
• When the account counter is turned on for the printer function, you must enter
your account number in the setting screen of the printer driver on your computer in
order to print.
When the account counter is turned on, the following messages appear on the touch
panel. There are two types of prompts, depending on whether the account counter
was turned on for both the colour copy and the black and white copy modes, or only
for colour copy mode.
Account counter enabled for both the colour copy and the black and white copy
modes
Enter Your Account Number.
The account counter is enabled only for the colour copy mode
When the [ ] key ([ACC.#-C] key) or the [COLOUR COPY START] key is pressed,
this message appears.
Enter Your Account Number For The Colour Mode.
Press [Cancel] To Change To B/W Mode.
Auditing Mode For Colour
In this case, enter your 5-digit account number as explained on page 1-20 to gain
access to the copier functions.
Auditing Mode
CANCEL
1-19