Xerox WorkCentre C226 User Manual page 150

Copier Operation
NOTE:
2-46
3. Load transparency film into the Bypass Tray.
4. Touch the [More...] key in the Paper Select display and select the transparency
film loaded in the Bypass Tray.
Auto
A4
Original
Plain
Auto
Exposure
Heavy Paper
Transparency Paper Select
100
%
Envelope
Copy Ratio
5. Touch the [SPEED MODE] key or the [QUALITY MODE] key for the transparency
film.
Please Select Transparency Mode.
OK
Speed Mode
Quality Mode
Basic Setting
Extra Size
About the steps that follow
If a DADF is being used, see page 2-13. If the document glass is being used, see
page 2-21.
To cancel the TRANSPARENCY INSERTS function, touch the [TRANSPARENCY
INSERTS] key again on the SPECIAL MODES screen.
When the copy job is finished, remove any transparencies that remain in the Bypass
Tray.
Remove any paper already in the Bypass Tray before
loading the transparency film. (To load paper in the
Bypass Tray, see page 1-23.)
Touch the [TRANSPARENCY] key.
SPEED MODE is for fast printing.
QUALITY MODE is for a high quality image.
After touching either key followed by the [OK] key, you
will return to the main screen of copy mode.
Xerox WorkCentre C226 User Guide