Procedure For F-Code Polling - Xerox WorkCentre C226 User Manual

Fax Unit

Procedure for F-Code Polling

NOTES:
5-54
Checking and clearing document data in a memory box
The procedure for checking document data in an F-code polling memory box by print-
ing it and the procedure for clearing data from a box are almost the same as the proce-
dures for printing and clearing document data from the Public Box.
Instead of touching the [PUBLIC BOX] key in step 3 of "Printing document data in the
Public Box" on page 5-40 or "Deleting document data from the Public Box" on page 5-
41, touch the key of the desired memory box.
If a document icon ( ) appears to the right of a mem-
ory box key, document data has been stored in that box
and you can print it out.
However, the contents cannot be printed or deleted
while the memory box is being used for transmission.
Make sure that a document has not been loaded in the DADF tray or on the document
glass, and then follow the steps below.
• You must know the sub-address (SEP) and passcode (PWD) of the other
machine's F-code polling memory box.
• Serial polling (selecting multiple fax machines to be polled using a group key or by
touching the [NEXT ADDRESS] key) is not possible with F-code polling.
1. In fax mode, touch the [SPECIAL MODES] key and then the [POLLING] key.
Special Modes Address Review
Polling
Dual Page
Program
Scan
so that it is not highlighted.
2. Touch the [OK] key.
aker Redial
Ok
If the address directory screen appears, touch the [CON-
DITION SETTINGS] key to display the condition settings
screen.
The [POLLING] key is highlighted and the polling icon
appears.
To cancel polling, touch the [POLLING] key once again
You will return to the initial screen.
Xerox WorkCentre C226 User Guide
ta
Marketing Group
Xerox Branch Ex
Public