Part Names And Functions Of Peripheral Devices - Xerox WorkCentre C226 User Manual

General Information

Part names and functions of peripheral devices

High Capacity
Feeder
Stand/1-Tray
Unit
Duplex Module/
2-Tray Unit
3-Tray Unit
Saddle Stitch
Finisher
1-12
The High Capacity Feeder provides the added convenience of having 3,500 sheets of
A4 or 8-1/2" x 11" paper (80 g/m2 or 21 lbs.) available.
This stand has one paper tray. It can hold approximately 500 sheets of the recom-
mended paper for colour (80 g/m2 or 21 lbs.), or approximately 500 sheets of Xerox
standard paper (80 g/m2 or 21 lbs.).
This stand includes a module for automatic two-sided printing and two paper trays.
The two trays can hold approximately 500 sheets of the recommended paper for
colour (80 g/m2 or 21 lbs.), or approximately 500 sheets of Xerox standard paper (80
g/m2 or 21 lbs.). To perform two-sided printing, a Duplex Bypass/Inverter Unit is
required.
This stand has three paper trays. Each tray can hold approximately 500 sheets of the
recommended paper for colour (80 g/m
Xerox standard paper (80 g/m
The finisher can deliver sets saddle stitched and folded at the paper centreline to form
a pamphlet, edge stapled in three different modes or unstapled. For two-hole or three-
hole output, a hole Punch Module must be installed.
2
or 21 lbs.), or approximately 500 sheets of
2
or 21 lbs.).
Xerox WorkCentre C226 User Guide