Xerox WorkCentre C226 User Manual page 211

Selecting Printing Functions
Retention
[Normal Print]
When selected, it is not necessary to use the operation panel on the machine to
begin printing. This setting is used for basic printing. As long as the machine is
operating properly, printing can be executed entirely from the computer.
[Hold After Print]
When selected, the print job is retained in the machine's hold job list after being
printed. This allows the user to print the job again if necessary, or delete the job if
no longer needed.
[Hold Before Print]
This setting is used to prevent print jobs from being misplaced. When a print job is
executed, the machine stores it in the hold job list rather than printing it. The user
can then initiate printing from the machine's operation panel, or delete the job as
needed.
[Proof Print]
This setting is used to prevent misprints when printing large numbers of copies.
When printing is executed, the machine prints only one trial set of copies and then
stores the remainder of the job in the hold job list. After the user has verified that
the copies are acceptable, the job can be resumed from the machine's operation
panel. (The trial set of copies is included in the total number of sets.) If the copies
are not acceptable, the job can be deleted without printing.
Xerox WorkCentre C226 User Guide 3-23