Xerox WorkCentre C226 User Manual page 415

Xerox WorkCentre C226 User Guide
1. Touch the [RELAY BROADCAST] key in step 3 of "Programming an F-Code
Memory Box" on page 5-82 and store a box name, sub-address, and passcode.
2. Touch the [RECIPIENT] key.
Fax Information
Box Name
Sub Address
123456/987654
Recipient
3. Touch the one-touch keys you wish to include as end receiving machines.
Touch indexes and the
Direct Address / Group
Select Address.
A B
C Group Xerox Corporation
Corpo.Tps
Frequent Use ABCD EFGHI JKLMN
• The selected one-touch keys are highlighted and programmed as end receiv-
ing machines.
• If you touch an incorrect key, touch the key again to remove the highlighting
and delete the destination.
4. To check the destinations that have been selected as end receiving machines,
touch the [ADDRESS REVIEW] key.
N
Address Review
OPQRST UVWXYZ
ABC Group
5. Touch the [OK] key in the screen of step 3.
You will return to the screen of step 2 and the number of stored as end receiving
machines will appear.
6. To exit, touch the [EXIT] key. To program another memory box, touch the [NEXT]
key.
Touching the [EXIT] key returns you to the screen of step 3 on page 5-82.
Touching the [NEXT] key returns you to the screen for programming a new
memory box (the screen of step 4 on page 5-82).
Programming, Editing, and Deleting F-Code Memory Boxes
The address selection screen appears.
keys as needed.
Address Review
OPQRST UVWXYZ ABC Group
You can delete a destination from the list of end receiv-
ing machines by touching it. When the confirmation mes-
sage appears, touch the [YES] key to confirm the
deletion.
5-87