Pamphlet Copy - Xerox WorkCentre C226 User Manual

Pamphlet copy

ent
Xerox WorkCentre C226 User Guide
The pamphlet copy function is used to arrange copies in proper order for eventual cen-
tre-stapling and folding into a booklet. Two original pages are copied onto each side of
copy paper. Four pages are, therefore, copied onto one sheet.
This function is convenient for arranging copies into an attractive booklet or pamphlet.
[Example] Copying eight originals in the pamphlet copy mode
Originals
(one-sided)
Left binding
1
2
3
4
5
6
7
8
Originals
(two-sided)
2
4
6
8
Right binding
1
3
5
7
• Scan the originals in order from the first page to the last page. The order of copy-
ing will be automatically adjusted by the machine.
• Either left binding (opening from right to left) or right binding (opening from left to
right) can be selected.
• Four originals will be copied onto one sheet. Blank pages may be automatically
added at the end, depending on the number of the originals.
• A Duplex Module/2-Tray Unit and Duplex Bypass/Inverter Unit are required for this
function.
• If a Saddle Stitch Finisher is installed, copies can be stapled in two positions along
the centre of copies and folded at the centre.
1. Touch the [PAMPHLET COPY] key on the IMAGE EDIT menu screen.
r
Photo Repeat
ge
Pamphlet Copy
The finished copies
can be folded.
First page
First page
The PAMPHLET COPY setting screen will appear. The
Mu
pamphlet copy icon
upper left corner of the screen to indicate that the func-
tion is turned on.
Image Edit Menu
(, etc.) will also appear in the
2-71