Disposal Of Hole Punch Scrap (When The Punch Unit Is Installed) - Xerox WorkCentre C226 User Manual

General Information
NOTE:
1-66
16. Push the Saddle Stitch Finisher back against the main unit.
Make a test print or copy in the staple sort mode to ensure that stapling is performed
properly.

Disposal of hole punch scrap (when the punch unit is installed)

1. Unlatch the Saddle Stitch Finisher and slide it away from the main unit.
2. Pull out the punch scrap collecting container and empty it.
3. Return the punch scrap collecting container to its original position.
4. Push the Saddle Stitch Finisher back against the main unit.
Discard the punch scraps in a plastic bag or other con-
tainer, taking care not to let the scraps scatter.
Xerox WorkCentre C226 User Guide