Xerox WorkCentre C226 User Manual page 119

NOTE:
Xerox WorkCentre C226 User Guide
5. Use the numeric keys to set the desired number of copies.
6. Press the [COLOUR COPY START (
key.
The 1-sided to 1-sided copying mode is set as the default in the initial settings.
Up to 999 can be set.
If you are only making a single copy, the copy can be
made with the copy number display showing "0". Use
the [C] (clear) key to cancel an entry if a mistake has
been made.
)] or [BLACK COPY START (
If the [C] key is pressed while originals are being
scanned, scanning will stop. If copying had already
started, copying and scanning will stop after the original
in progress is output to the original exit area. In these
cases the copy quantity will be reset to "0".
Normal Copying
)]
2-15