Canada; Europe; Certification To 1999/5/Ec Radio Equipment & Telecommunications Terminal Equipment Directive - Xerox WorkCentre C226 User Manual

Canada

CAUTION:

Europe

Certification to 1999/5/EC Radio Equipment &
Telecommunications Terminal Equipment Directive
NOTE:
xxii
This product meets the applicable Industry Canada technical specifications.
'The Ringer Equivalence Number (REN) is an indication of the maximum number of devices allowed to be
connected to a telephone interface. The termination on an interface may consist of any combination of
devices subject only to the requirement that the sum of the RENs of all the devices does not exceed five.
The REN value may be found on the label located on the rear of the equipment.
Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated
by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions,
may give the telecommunications company cause to request the user to disconnect the equipment.
Users should ensure for their own protection the electrical ground connections of the power utility, telephone
lines and internal metallic water pipe system, if present, are connected together. This precaution may be
particularly important in rural areas.
Users should not attempt to make such connections themselves, but should contact the appropriate
electric inspection authority or electrician, as appropriate.
This Xerox product has been self-certified by Xerox for pan-European single terminal connection to the
analogue public switched telephone network (PSTN) in accordance with Directive 1999/5/EC.
The product has been designed to work with the national PSTNs and compatible PBXs of the following
countries:
Austria Germany
Belgium Greece
Denmark Iceland
France Ireland
Italy Spain
Bulgaria Romania
In the event of problems, you should contact your local Xerox representative in the first instance.
This product has been tested to and is compliant with TBR21, a technical specification for terminal
equipment for use on analogue-switched telephone networks in the European Economic Area.
The product may be configured to be compatible with other country networks. Please contact your Xerox
representative if it needs to be reconnected to another country's network. There are no user-adjustable
settings in the product.
Although this product can use either loop disconnect (pulse) or DTMF (tone) signaling it is recommended
that it is set to use DTMF signaling. DTMF signaling provides reliable and faster call setup.
Modification, connection to external control software or to external control apparatus not authorized by
Xerox, will invalidate its certification.
Luxembourg Sweden
Netherlands Switzerland
Norway United Kingdom
Portugal Finland
Czech Republic Poland
Xerox WorkCentre C226 User Guide