Xerox WorkCentre C226 User Manual page 212

Printer Operation
3-24
[PIN] (5-digit identification number)
A PIN number can be programmed in the printer driver for increased security
when printing jobs from the hold job list. When this is done, the PIN number must
be entered at the machine's operation panel to print a job in the job hold list.
• "Hold After Print" mode with password:
Password entry on the operation panel of the printer is needed for additional
printing of the hold job.
• "Hold Before Print" mode with password:
Password entry on the operation panel of the printer is needed to start
printing.
• "Proof Print" mode with password:
Password entry on the operation panel of the printer is needed to print the
remaining sets after printing one set. The first set is printed without password
entry.
Default setting: Normal Print
Notify Job End
Select whether or not you wish to be notified about printing completed.
This function only operates when the Xerox Print Status Monitor is running. Even if
selected, the function will not operate when the Xerox Print Status Monitor is not
running.
Default setting: Selected
Defaults
Returns the settings in the job control window to the default settings.
Xerox WorkCentre C226 User Guide