Selecting Transport Protocols; Screen Layout - Xerox WorkCentre 5230A System Administration Manual

Selecting Transport Protocols

When using the NetWare, SMB, or SNMP port, change the transport protocol if
required.
• NetWare: IPX/SPX, TCP/IP
• SMB: NetBEUI, TCP/IP
• SNMP: UDP, IPX
1.
On the CentreWare Internet Services home page for the machine, select the
[Properties] tab.
2.
In the [Properties] frame, select [Port Status].
3.
Select the required transport protocol.
NetWare: IPX/SPX, TCP/IP
SMB: NetBEUI, TCP/IP
SNMP: UDP, IPX
4.
Select [Apply].

Screen Layout

The CentreWare Internet Services home
page contains four panels without visible
boundaries. You can change the left and right
panel sizes by dragging the boundary
between them.
Header Panel
Displays the header for all pages. The header
includes the CentreWare Internet Services
logo and the model of the machine. The
header for the WorkCentre 5225A/5230A also
includes a user mode icon, and the name or type of a logged-in user. Just under this
panel on most pages is the tab bar which corresponds to the five functions or page
buttons. These are [Status], [Jobs], [Print], [Scan], [Properties], and [Support]. You can
navigate through the pages when you click the text on each tab.
Logo Panel
Displays the company logo.
Menu Panel
Displays a navigation tree, listing the items available within each category, with the
currently displayed item highlighted.
Selecting Transport Protocols
Header Panel
Menu
Panel
Main Panel
Logo
Panel
153