Xerox WorkCentre 5230A System Administration Manual page 417
Xerox print, copy, scan, fax, email system administration guide
Hide thumbs
Also See for WorkCentre 5230A:
- Brochure & specs (4 pages) ,
- Supplementary manual (30 pages) ,
- Quick network setup manual (4 pages)
Table of Contents
Advertisement
Code
027-599
An SMB protocol error occurred. Perform the same operation again. Contact the
Xerox Welcome Center if the problem persists.
027-702
The certificate for addresses does not exist. Register the certificate with the
machine.
027-703
The certificate for addresses has expired. Register a valid certificate with the
machine.
027-704
The certificate for addresses is not trusted. Register a valid certificate with the
machine.
027-705
The certificate for addresses has been revoked. Register a valid certificate with
the machine.
027-706
The machine has no S/MIME certificate for the machine's e-mail address.
Import an S/MIME certificate into the machine.
027-707
The S/MIME certificate for the machine's e-mail address has expired. Import a
valid S/MIME certificate into the machine.
027-708
The S/MIME certificate for the machine's e-mail address is not trusted. Import a
trusted S/MIME certificate into the machine.
027-709
The S/MIME certificate for the machine's e-mail address has been revoked.
Import a valid S/MIME certificate into the machine.
027-710
The machine has no S/MIME certificate for the received e-mail. Ask the sender
to attach an S/MIME certificate to e-mail.
027-711
The S/MIME certificate for the sender was not retrieved from the received e-
mail. Import a sender's S/MIME certificate into the machine, or ask the sender to
attach an S/MIME certificate to e-mail.
027-712
The S/MIME certificate for the received e-mail has expired or is not trusted. Ask
the sender to send e-mail with a valid certificate.
027-713
The reception of the e-mail was rejected, because the e-mail contents had been
altered during transmission. Notify the sender of the possibility of falsification,
and request the sender to resend the e-mail.
027-714
The reception of the e-mail was rejected, because the sender written in the
"From" field differs from the e-mail address registered with the signature. Notify
the sender of the possibility of impersonation, and ask the sender to resend the
e-mail.
027-715
The S/MIME certificate for the received e-mail has not been registered on the
machine or is not effective on the machine. Import the sender's S/MIME
certificate into the machine, or if it has been imported, register the certificate on
the machine so that it becomes effective.
027-716
The reception of the e-mail was rejected, because the S/MIME certificate was
not trusted. Ask the sender to send e-mail with a trusted certificate.
027-730
The number of the document pages attached to the SMTP e-mail was more
than the maximum number of pages allowed for the Split Send feature. Reduce
the number of the document pages, and try again.
027-731
A Job Template server access limit error occurred. Wait until the NetWare job in
process is completed, and try again.
027-732
A Job Template server access error occurred. Check if the hard disk on the
server is working correctly and has sufficient free space, and try again.
Description and Remedy
Fault Codes
417
Hide quick links:
Advertisement
Table of Contents
