Output Size Defaults; Reduce/Enlarge Presets - Xerox WorkCentre 5230A System Administration Manual

6 Setups
• Others
Specifies other miscellaneous sizes. Use the scroll buttons to switch between
screens.
• Custom Size
Specifies a user-defined size set using the scroll buttons.

Output Size Defaults

This feature allows you to configure or change the output size buttons displayed when
[Enter Output Size] is selected for the [Reduce/Enlarge] feature on the [Layout
Adjustment] screen.
1.
Select [Output Size Defaults] in
the [Features] menu.
2.
Change the required settings.
Use the scroll buttons to switch
between screens.
3.
Select [Close].
Output Size 1 to 8
• A/B Series Size
Specifies standard document sizes in A/B series.
• Inch Size
Specifies standard document sizes in Inch series.
• Others
Specifies other miscellaneous sizes.

Reduce/Enlarge Presets

This feature allows you to configure or change the reduction/enlargement ratio buttons
that appear when [Proportional %] is selected for the [Reduce/Enlarge] feature on the
[Layout Adjustment] screen.
1.
Select [Reduce/Enlarge
Presets] in the [Features] menu.
2.
Change the required settings.
Use the scroll buttons to switch
between screens.
3.
Select [Close].
R/E Preset 1 to 7
• Preset %
Specifies the reduce/enlarge ratios assigned to each of the seven buttons. Select
from 26 options in the range of 25-400%.
• Variable %
Specifies the reduce/enlarge ratios using the scroll buttons in the range of 25% to
400% in 1% increments.
108