Xerox WorkCentre 5230A System Administration Manual page 407

Code
018-592 A LOCK directory could not be created. Manually delete the exiting lock
directory (*.LCK) from the save destination, and try again. Or, if the same folder
name exists in the save destination, specify another folder name.
018-593 The LOCK directory could not be deleted. Manually delete the exiting lock
directory (*.LCK) from the save destination, and try again.
018-596 An LDAP protocol error occurred. Try again. If the problem persists, contact the
Xerox Welcome Center.
018-701 An LDAP server protocol error occurred in the address book operation. The
server returned the RFC2251 specification protocol error 1 (operations error)
during the address book query. Check that the [LDAP Server/Directory Service]
settings in [Remote Authentication Server/Directory Service] are correct, and
check if the problem occurred on the server side.
018-702 An LDAP server protocol error occurred in the address book operation. The
server returned the RFC2251 specification protocol error 2 (protocol error)
during the address book query. Review the LDAP server settings and repeat the
same operation.
018-703 An LDAP server protocol error occurred in the address book operation. The
server returned the RFC2251 specification protocol error 3 (time limit exceeded)
during the address book query. Review the search conditions and search root
entry, then repeat the same operation. Contact the network administrator if the
problem persists.
018-704 An LDAP server protocol error occurred in the address book operation. The
server returned the RFC2251 specification protocol error 4 (size limit exceeded)
during the address book query. Review the search conditions and search root
entry, then repeat the same operation. Contact the network administrator if the
problem persists.
018-705 An LDAP server protocol error occurred in the address book operation. The
server returned the RFC2251 specification protocol error 5 (compare false)
during the address book query. The compare operation returned false. Check
the LDAP server status.
018-706 An LDAP server protocol error occurred in the address book operation. The
server returned the RFC2251 specification protocol error 6 (compare true)
during the address book query. The compare operation returned true, indicating
there is no problem.
018-707 An LDAP server protocol error occurred in the address book operation. The
server returned the RFC2251 specification protocol error 7 (authentication
method not supported) during the address book query. Change the
authentication method and review the authentication settings.
018-708 An LDAP server protocol error occurred in the address book operation. The
server returned the RFC2251 specification protocol error 8 (strong
authentication required) during the address book query. Check that there are no
errors in the authentication settings, and strengthen subsequent authentication.
018-710 An LDAP server protocol error occurred in the address book operation. The
server returned the RFC2251 specification protocol error 10 (referral) during the
address book query. There is nothing registered in the specified search range.
Check the authentication settings status.
018-711 An LDAP server protocol error occurred in the address book operation. The
server returned the RFC2251 specification protocol error 11 (admin limit
exceeded) during the address book query. Check the server operating status.
Description and Remedy
Fault Codes
407