Original Size Defaults; Local Terminal Information - Xerox WorkCentre 5230A System Administration Manual

6 Setups
3.
Select [Close].
R/E Preset 1 to 7
• Preset %
Specifies the reduce/enlarge ratios assigned to each of the seven buttons. Select
from 24 options in the range of 50-400%.
• Variable %
Specifies the reduce/enlarge ratios using the scroll buttons in the range of 50% to
400% in 1% increments.

Original Size Defaults

This feature allows you to configure or change the scan size buttons on the [Original
Size] feature on the [Layout Adjustment] screen.
1.
Select [Original Size Defaults] in
the [Features] menu.
2.
Change the required settings.
Use the scroll buttons to switch
between screens.
3.
Select [Close].
Original Size 1 to 11
• A/B Series Size
Specifies standard document sizes in A/B series. Use the scroll buttons to switch
between screens.
• Inch Size
Specifies standard document sizes in Inch series. Use the scroll buttons to switch
between screens.
• Others
Specifies other miscellaneous sizes. Use the scroll buttons to switch between
screens.

Local Terminal Information

This feature allows you to register or change the local terminal information.
1.
Select [Local Terminal
Information] in the [Features]
menu.
2.
Change the required settings.
Use the scroll buttons to switch
between screens.
3.
Select [Close].
Local Name
Specifies the local name so that the remote machine can identify your machine. Enter
up to 20 characters using the screen keyboard on the touch screen. The local name
will be shown in the display or communication management report of the destination.
116