Tcp/Ip - Xerox WorkCentre 5230A System Administration Manual

TCP/IP

This section explains the troubleshooting procedures and restrictions while using
TCP/IP.
Troubleshooting
The possible causes, confirmation methods, and actions are as follows.
When using Windows 2000/Windows XP/Windows Server 2003/
Windows Vista
When printing fails
The correct IP address is not
specified.
When [Receiving Buffer -
LPD] is set to [Spool to
Memory], the size of print
data sent in one print request
exceeds the maximum size
specified.
A fault occurred during print
processing.
The selected transport
protocol does not conform
with the client.
The print data format to be
processed by the machine
does not match the data
format sent from the client.
When the required printing result is not obtained
The specified print language
is different from the print
language of the print data.
The print driver that
accompanies the machine is
not being used (a third party
print driver is being used).
Cause Confirmation Method
Check whether the IP
address of the machine is
correct.
Check the maximum
receiving data size on the
touch screen of the machine,
and then compare it with the
size of print data to be sent
as one request.
Check the error message on
the touch screen.
Check the selected transport
protocol on the touch screen.
Cause Confirmation Method
Check the specified print
language and the print
language of the print data.
Check whether the print
driver that accompanies the
machine is selected.
Network-related Problems
Specify the correct IP
address for the machine.
When the print data size
exceeds the maximum size in
one file, divide the file into
smaller files than the
maximum receiving data
size, and then send the print
request again.
When the print data size
exceeds the maximum size in
multiple files, reduce the
number of files to be printed
at one time.
Switch the machine off and
on, and then retry printing.
Select a transport protocol
conforming with the client.
Disable the output function of
Ctrl-D.
–
Specify a print language
matching that of the print
data.
Select the print driver that
accompanies the machine. If
the print driver is not found,
install and select it. If a third
party print driver is used, you
may have unexpected
results.
Action
Action
379