Xerox WorkCentre 5230A System Administration Manual page 182

7 CentreWare Internet Services
General Setup
182
Feature
Paper Settings
Power
Saver/Energy
Saver Settings
Stored
Document
Settings
Memory
Settings
Setting items
Paper Type
Lists different paper types.
Paper Name
Enter the names for [Custom Paper 1] to [Custom
Paper 5].
Priority
Allows you to configure the priority settings for various
paper types when the auto tray is selected.
Time to Low Power Mode
Allows you to specify the time-out period before the
machine enters the Low Power Mode from user
operation.
Time to Sleep Mode
Allows you to specify the time-out period before the
machine enters the Sleep Mode from the Low Power
Mode.
Minimum Passcode Length for Stored Jobs
Allows you to specify the minimum number of digits the
passcodes for the Secure Print jobs must contain.
Allows you to change the settings for the free space
available and the print page buffer size for USB,
EtherTalk, SMB, NetWare, LPD, IPP, Port9100, and
PostScript memory.
Free Space
Displays the free memory space.
Print Page Buffer
Displays the memory buffer size.
USB
Enter the print page buffer for the USB interface
between 64 KB and 1024 KB in 32 KB increments.
EtherTalk
Enter the print page buffer for the EtherTalk interface
between 1024 KB and 2048 KB in 32 KB increments.
SMB
Select the spool destination for the job.
• Spool to Memory – Enter a value between 512 KB
and 32 MB (32768 KB) in 256 KB increments.
• Spool to Hard Disk – The print page buffer text box
will be blank and the value cannot be updated.
• No Spooling – Enter a value between 64 KB and
1024 KB in 32 KB increments.
NetWare
Enter the print page buffer for NetWare between 64 KB
and 1024 KB in 32 KB increments.