Ipp (Internet Printing Protocol); Information Checklist; Ipp Environment - Xerox WorkCentre 5230A System Administration Manual

8 Printer Environment Settings

IPP (Internet Printing Protocol)

This section explains how to set up the machine to operate in an IPP (Internet Printing
Protocol) environment. The following information is provided:
Information Checklist – page 270
IPP Environment – page 270
IPP Installation – page 271
Installation Procedure – page 271
Network Communication Setup – page 271
Computer Setup – page 273
Test Print – page 273

Information Checklist

Before starting the IPP installation procedures, make sure that the following items are
available or have been performed.
An existing operational TCP/IP network is required. These procedures
are not designed to install a network.
Obtain and record the following information:
• IP address
• Gateway address
• Subnet mask (for IPv4) / Prefix (for IPv6)
• Host name
Test the machine to make sure that it is fully installed and functioning
correctly.
Install the print driver.
If problems are encountered during the installation of the machine, refer to
Solving on page 349

IPP Environment

System configuration
The machine supports Internet Printing Protocol (IPP). As Windows 2000/Windows XP/
Windows Server 2003/Windows Me/Windows Vista are installed with the client
software needed to output to an IPP printer, you can specify this printer using the Add
Printer Wizard. Using IPP, you can print to a remote printer through the Internet or
intranet.
The transport protocol for IPP can be TCP/IP.
270
Item
.
By
Customer
Customer
Customer
Customer
Problem