Document Feeder Rollers; Replacing The Drum Cartridge; Removing The Old Drum Cartridge - Xerox WorkCentre 5230A System Administration Manual

3 Maintenance
1.
Wipe the document cover and
document glass with a soft cloth
moistened with water or Xerox-
approved cleaner to remove any
marks, and then wipe with a
soft, dry cloth.
2.
If the document feeder is
installed, wipe the document
feeder glass and the film on the
cover with a soft cloth moistened with water or Xerox-approved cleaner to remove
any marks, and then wipe with a soft, dry cloth.

Document Feeder Rollers

If the machine is installed with a document feeder, clean the feeder rollers monthly to
prevent streaks appearing on the output and to prevent document feeder paper jams.
1.
Open the document feeder
cover.
2.
Wipe the document feeder
rollers while turning them with a
soft cloth moistened with water
to remove any dirt.
3.
Close the cover.

Replacing the Drum Cartridge

The drum cartridge is a customer replaceable unit. The machine will display a warning
message before the drum reaches the end of its life. When the message is displayed,
order a replacement cartridge to ensure continuous operation.

Removing the Old Drum Cartridge

1.
Make sure that the machine is
not operating, and open the
front cover.
30
Feeder film
Document cover
Document
feeder glass
Document glass
Document feeder
rollers