Properties - Xerox WorkCentre 5230A System Administration Manual

7 CentreWare Internet Services

Properties

This tab allows you to view and set the machine properties. These include the machine
details and configuration, the CentreWare Internet Services settings, the port settings,
protocol settings, emulation settings, and the memory settings. The items displayed will
depend on the model and configuration of the machine.
NOTE: Some settings with data entry use bytes as units of data volume. Each
character that you enter is one byte.
1.
Click [Properties] on the Main Panel on the home page.
2.
Select an item from the collapsible menu on the Menu Panel. To open each folder,
click "+" on its left side to expand and access the items beneath the folder.
3.
To change settings, use the drop-down list box, text boxes, and check boxes on
the page.
The default settings in the drop-down list box are indicated with an asterisk (*).
4.
After changes have been made, click [Apply].
• To cancel any changes you have made, click [Undo].
• To display the current machine settings, click [Refresh].
NOTE: Some settings will be available only after you restart CentreWare Internet
Services or after the machine is switched off and on.
178