Auto Job Promotion - Xerox WorkCentre 5230A System Administration Manual

6 Setups
Extended Tray Module
Select the type of Extended Tray Module used. If the Left Side Tray is installed, select
[Offset Module] to use the Center Tray.

Auto Job Promotion

Specifies whether jobs can automatically be promoted, bypassing other jobs, when the
machine is unable to complete the current job. For example, if there is no paper in the
required paper tray for the current job.
NOTE: Stored documents, such as secure prints and sample prints, cannot be
promoted.
Default Print Paper Size
Specifies the paper size to be used as the initial setting.
Odd Page 2 Sided
Specifies whether to add a blank page to a document that contains an odd number of
pages, so that the document prints as an even number of pages.
Paper Size Settings
Specifies the paper size table used when the machine is set to detect standard sizes
of documents and recording media automatically.
You can select from the following tables: [A/B Series (8 × 13")], [A/B Series], [A/B
Series (8K/16K)], [A/B Series (8 × 13"/8 × 14")], and [Inch Series].
NOTE: When loading trays with postcards, contact the Xerox Welcome Center to
have the tray settings changed specially for the use of postcards.
• Documents
The machine automatically recognizes the sizes listed on the following page when
a document is placed on the document glass or loaded in the document feeder.
78