[Link Job Flow Sheet To Mailbox] Screen; Stored Programming; Registering Operations With A Job Number - Xerox WorkCentre 5230A System Administration Manual

Link Job Flow Sheet to Mailbox
Displays the [Link Job Flow Sheet to Mailbox] screen.

[Link Job Flow Sheet to Mailbox] Screen

This feature allows you to link the mailbox to a job flow sheet that instructs how
documents in the mailbox are to be processed. For more information on a job flow
sheet, refer to
1.
Select [Link Job Flow Sheet to
Mailbox] on the [Mailbox XXX –
Create/Delete] screen and
select [Change Settings].
2.
Change the required settings.
3.
Select [Close].
Cut Link
Removes linkage with a job flow sheet if any linkage has already been made.
Create/Change Link
Allows you to select a job flow sheet to be linked with the mailbox. For the displayed
[Sheet Filtering], [Create], and [Edit/Delete] buttons, refer to
page 126
NOTE: The [Auto Start] check box and the [Start] button also appear on the [Link Job
Flow Sheet to Mailbox] screen when the mailbox has been linked with any job flow
sheet. Checking the [Auto Start] check box causes the linked job flow sheet to be
automatically executed when a new document is saved in the mailbox. Selecting
[Start] causes the execution of the linked job flow sheet to be started.

Stored Programming

This feature allows you to register a series of operations with job numbers.

Registering Operations with a Job Number

You can store up to 58 consecutive operations for each job number. To register the
required operations with a job number, follow the steps below.
1.
Select [Stored Programming] in
the [Group] menu.
2.
Select [Store], and then select a
job number that reads "Not in
Use".
3.
Perform the operations to be stored for the job number.
NOTE: You can store operations performed on the control panel, except operations
performed in the [Setup] menu on the [Tools] screen.
4.
Press the <Start> or <Clear All> button on the control panel.
Store
Selecting this button and then selecting a job number allows you to register a series of
operations with the job number. To complete registering operations, press the <Start>
or <Clear All> button on the control panel.
Create Job Flow Sheet on page 126
.
.
Create Job Flow Sheet on
Setup
125