Remote Authentication Server Settings - Xerox WorkCentre 5230A System Administration Manual

Xerox print, copy, scan, fax, email system administration guide
Hide thumbs Also See for WorkCentre 5230A:
Table of Contents

Advertisement

6 Setups
• POP Password Encryption
Specifies whether to enable the POP password encryption using APOP.
SMTP Server Settings
Specifies the SMTP server settings. Use the scroll buttons to switch between screens.
• SMTP Server Name / IP Address
Specifies the domain name or IP address of the SMTP server.
• SMTP Server Port Number
Specifies the SMTP server port number.
• E-mail Send Authentication
Specifies the SMTP server authentication method. If you select [POP before SMTP],
POP server authentication is required before transmitting e-mails to the SMTP
server. If you select [SMTP AUTH], the SMTP server authentication is enabled.
• SMTP AUTH Login Name
Specifies the SMTP AUTH login name. Enter a login name of up to 64 characters.
This entry is required only when [SMTP AUTH] is selected on the [E-mail Send
Authentication] screen.
• SMTP AUTH Password
Specifies the SMTP AUTH password. Enter a password of up to 36 characters and
then re-enter the password for confirmation. This entry is required only when [SMTP
AUTH] is selected on the [E-mail Send Authentication] screen.
Domain Filtering
Specifies domain name restrictions to filter incoming e-mail.
• Domain Filtering
Specifies whether to enable domain filtering, and the type of filtering. Select from
[Allow Domains] and [Block Domains] to enable filtering.
• Domain 1 to 50
Specifies the domain names to be restricted or permitted according to the selection
on the [Domain Filtering] screen.

Remote Authentication Server Settings

This feature allows you to set up the external authentication server and directory
service settings. The options available may vary depending on your machine
configuration.
1.
Select [Remote Authentication
Server Settings] in the
[Features] menu.
2.
Change the required settings.
3.
Select [Close].
Authentication System Setup
• Authentication System
Specifies the remote authentication service. Select from [Kerberos (Windows
2000)], [Kerberos (Solaris)], [LDAP], [SMB], and [Authentication Agent].
96

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents