Siemens SINUMERIK 828D Programming Manual page 562

Tables
16.5 Predefined subroutine calls
POSM INT: Location no.
for positioning
SETTIA VAR INT: Status =
result of the
operation (return
value)
SETTA VAR INT: Status =
result of the
operation (return
value)
RESETMON VAR INT: Status =
result of the
operation (return
value)
25. Synchronous spindle
Keyword / 1st para-
subroutine meter
identifier
COUPDEF AXIS:
Follow-
ing axis
or
following
spindle
(FS)
COUPDEL AXIS:
Follow-
ing axis
or
following
spindle
(FS)
COUPOF AXIS:
Follow-
ing axis
or
following
spindle
(FS)
562
INT: No. of the
magazine to
be moved
INT: Magazine
number
INT: Magazine
number
INT: Internal T
no.
2nd 3rd para- 4th para-
para- meter meter
meter
AXIS: REAL: REAL:
Lead- Nume- Denomi-
ing rator nator
axis or transfor- transfor-
leading mation mation
spindle ratio (FA) ratio (LA)
(LS) or (FS) or (LS)
AXIS:
Lead-
ing
axis or
leading
spindle
(LS)
AXIS:
Lead-
ing
axis or
leading
spindle
(LS)
INT: INT:
Location Magazine
number of number of
the internal the internal
magazine magazine
INT: Wear
group no.
INT: Wear
group no.
INT: D no. of
tool
5th parameter
Block change behavior
STRING[8]: Block change behavior:
"NOC": No block change control,
block change is enabled
immediately, "FINE": Block change
on "synchronism fine", "COARSE":
Block change on synchronism
coarse and "IPOSTOP": block
change in setpoint-dependent
termination of overlaid movement. If
the block change behavior is not
specified, the set behavior is
applicable and there is no change.
The block change is enabled
immediately.
Programming Manual, 07/2010, 6FC5398-1BP40-0BA0
Position magazine
Deactivate tool from wear group
Activate tool from wear group
Set actual value of tool to setpoint
6th para- Explanation
meter
STRING[2]: Couple
"DV": definition:
Setpoint Definition of
coupling synchronized
"AV": spindle
Actual- grouping.
value
coupling
Couple
delete:
Delete
synchronized
spindle
grouping.
Fastest
possible
deactivation
of synchro-
nous opera-
tion.
Fundamentals