Dwell Time (G4) - Siemens SINUMERIK 828D Programming Manual

14.10

Dwell time (G4)

Function
can be used to program a "dwell time" between two NC blocks during which workpiece
G4
machining is interrupted.
Note
interrupts continuous-path mode.
G4
Application
For example, for relief cutting.
Syntax
G4 F.../S<n>=...
Note
must be programmed in a separate NC block.
G4
Fundamentals
Programming Manual, 07/2010, 6FC5398-1BP40-0BA0
Supplementary commands
14.10 Dwell time (G4)
431