Siemens SINUMERIK 828D Programming Manual page 489

Operation Meaning
PAROTOF Deactivate frame rotation in relation to
workpiece
PCALL Call subprograms with absolute path
and parameter transfer
PDELAYOF Punching with delay OFF
PDELAYON Punching with delay ON
3)
PHU Physical unit of a variable
PL 1. B spline: Node clearance
2. Polynomial interpolation: Length of
the parameter interval for polynomial
interpolation
PM Per minute
PO Polynomial coefficient for polynomial
interpolation
POCKET3 Milling cycle, rectangular pocket (any
milling cutter)
POCKET4 Milling cycle, circular pocket
(any milling cutter)
POLF LIFTFAST retraction position
POLFA Start retraction position of single axes
with $AA_ESR_TRIGGER
POLFMASK Enable axes for retraction without a
connection between the axes
POLFMLIN Enable axes for retraction with a linear
connection between the axes
POLY Polynomial interpolation
POLYPATH Polynomial interpolation can be
selected for the AXIS or VECT axis
groups
Fundamentals
Programming Manual, 07/2010, 6FC5398-1BP40-0BA0
W Description see
1) 2)
PGsl
m
Frame generation according to tool orientation
(TOFRAME, TOROT, PAROT) (Page 384)
PGAsl
PGAsl
m
PGAsl
m
PGAsl
PGAsl
s
1.
2.
PGsl
Approach and retraction (G140 to G143, G147, G148,
G247, G248, G347, G348, G340, G341, DISR, DISCL,
FAD, PM, PR) (Page 310)
PGAsl
s
BHDsl/BHFsl
BHDsl/BHFsl
PGsl/PGAsl
m
Fast retraction for thread cutting (LFON, LFOF, DILF,
ALF, LFTXT, LFWP, LFPOS, POLF, POLFMASK,
POLFMLIN) (Page 277)
PGsl
m
Fast retraction for thread cutting (LFON, LFOF, DILF,
ALF, LFTXT, LFWP, LFPOS, POLF, POLFMASK,
POLFMLIN) (Page 277)
PGsl
m
Fast retraction for thread cutting (LFON, LFOF, DILF,
ALF, LFTXT, LFWP, LFPOS, POLF, POLFMASK,
POLFMLIN) (Page 277)
PGsl
m
Fast retraction for thread cutting (LFON, LFOF, DILF,
ALF, LFTXT, LFWP, LFPOS, POLF, POLFMASK,
POLFMLIN) (Page 277)
PGAsl
m
PGAsl
m
Tables
16.1 Instructions
489