Siemens SINUMERIK 828D Programming Manual page 537

Group 8: Settable zero offset
G function No.
1)
G500 1.
G54 2.
G55 3.
G56 4.
G57 5.
G505 6.
... ...
G599 100.
Each of the G functions in this group is used to activate an adjustable user frame $P_UIFR[ ].
G54 corresponds to frame $P_UIFR[1], G505 corresponds to frame $P_UIFR[5].
The number of adjustable user frames and, therefore, the number of G functions in this group, can be parameterized using
machine data MD28080 $MC_MM_NUM_USER_FRAMES.
Group 9: Frame suppression
G function No.
1)
G53 1.
SUPA 2.
G153 3.
Group 10: Exact stop - continuous-path mode
G function No.
1)
G60 1.
G64 2.
G641 3.
G642 4.
G643 5.
G644 6.
G645 7.
Fundamentals
Programming Manual, 07/2010, 6FC5398-1BP40-0BA0
Significance
Deactivation of adjustable work offset (G54 to G57,
G505 to G599)
1st Settable zero offset
2nd adjustable work offset
3rd adjustable work offset
4th adjustable work offset
5th adjustable work offset
...
99th adjustable work offset
Significance
Suppression of current frames:
Programmable frame including system frame for
TOROT and TOFRAME and active adjustable frame
(G54 to G57, G505 to G599).
As for G153 including suppression of system frames
for actual-value setting, scratching, ext. work offset,
PAROT including handwheel offsets (DRF), [external
work offset], overlaid movement
As for G53 including suppression of all channel-
specific and/or NCU-global basic frames
Significance
Exact stop
Continuous-path mode
Continuous-path mode with smoothing as per
distance criterion (= programmable rounding
clearance)
Continuous-path mode with smoothing within the
defined tolerances
Continuous-path mode with smoothing within the
defined tolerances (block-internal)
Continuous-path mode with smoothing with maximum
possible dynamic response
Continuous-path mode with smoothing and tangential
block transitions within the defined tolerances
16.4 G function groups
MD20150 W
2) 3)
+ m
+ m
+ m
+ m
+ m
+ m
+ m
+ m
MD20150 W
2) 3)
- n
- n
- n
MD20150 W
2) 3)
+ m
+ m
+ m
+ m
+ m
+ m
+ m
Tables
STD
4)
SAG MM
x
STD
4)
SAG MM
STD
4)
SAG MM
x
537