Constant Grinding Wheel Peripheral Speed (Gwpson, Gwpsof) - Siemens SINUMERIK 828D Programming Manual

6.4

Constant grinding wheel peripheral speed (GWPSON, GWPSOF)

Function
The "Constant grinding wheel peripheral speed (GWPS)" function is used to set the grinding
wheel speed so that, taking account of the current radius, the grinding wheel peripheral
speed remains constant.
Syntax
GWPSON(<t no.>)
GWPSOF(<t no.>)
S.../S<n>=...
Significance
GWPSON
GWPSOF
<t no.>
:
S...
S<n>=...
Note
A grinding wheel peripheral speed can only be programmed for grinding tools (types 400
to 499).
Fundamentals
Programming Manual, 07/2010, 6FC5398-1BP40-0BA0
6.4 Constant grinding wheel peripheral speed (GWPSON, GWPSOF)
: Select constant grinding wheel peripheral speed
: Deselect constant grinding wheel peripheral speed
: It is only necessary to specify the T number if the tool with this T
number is not active.
Peripheral speed in m/s or ft/s for the master spindle
: Peripheral speed in m/s or ft/s for spindle <n>
Note:
The peripheral speed specified with
Spindle motion
applies to the master spindle.
S0=...
107