Axial Zero Offset (G58, G59) - Siemens SINUMERIK 828D Programming Manual

ATRANS X... Y... Z...
Translation through the offset values programmed in the specified axis directions. The
currently set or last programmed zero point is used as the reference.
12.3.2

Axial zero offset (G58, G59)

Function
The G58 and G59 functions can be used to substitute translation components of the
programmable work offset with specific axes:
● G58 is used for the absolute translation component (coarse offset).
● G59 is used for the additive translation component (fine offset).
Fundamentals
Programming Manual, 07/2010, 6FC5398-1BP40-0BA0
Coordinate transformations (frames)
12.3 Programmable zero offset
361