Siemens SINUMERIK 828D Programming Manual page 473

Operation Meaning
FOCOF Deactivate travel with limited
torque/force
FOCON Activate travel with limited torque/force
FOR Counter loop with fixed number of
passes
FP Fixed point: Number of fixed point to be
approached
FPO Feedrate characteristic programmed via
a polynomial
FPR Rotary axis identifier
FPRAOF Deactivate revolutional feedrate
FPRAON Activate revolutional feedrate
FRAME Data type for the definition of coordinate
systems
FRC Feedrate for radius and chamfer
FRCM Feedrate for radius and chamfer, modal
FROM The action is executed if the condition is
fulfilled once and as long as the
synchronized action is active
FTOC Change fine tool offset
FTOCOF Online fine tool offset OFF
3)
FTOCON Online fine tool offset ON
FXS Travel to fixed stop ON
FXST Torque limit for travel to fixed stop
FXSW Monitoring window for travel to fixed
stop
FZ Tooth feedrate
Fundamentals
Programming Manual, 07/2010, 6FC5398-1BP40-0BA0
W Description see
1) 2)
PGAsl
m
PGAsl
m
PGAsl
PGsl
s
Fixed-point approach (G75, G751) (Page 412)
PGAsl
PGsl
Feedrate for positioning axes/spindles (FA, FPR,
FPRAON, FPRAOF) (Page 134)
PGsl
Feedrate for positioning axes/spindles (FA, FPR,
FPRAON, FPRAOF) (Page 134)
PGsl
Feedrate for positioning axes/spindles (FA, FPR,
FPRAON, FPRAOF) (Page 134)
PGAsl
PGsl
s
Chamfer, rounding (CHF, CHR, RND, RNDM, FRC,
FRCM) (Page 282)
PGsl
m
Chamfer, rounding (CHF, CHR, RND, RNDM, FRC,
FRCM) (Page 282)
PGAsl
PGAsl
PGAsl
m
PGAsl
m
PGsl
m
Travel to fixed stop (FXS, FXST, FXSW) (Page 417)
PGsl
m
Travel to fixed stop (FXS, FXST, FXSW) (Page 417)
PGsl
Travel to fixed stop (FXS, FXST, FXSW) (Page 417)
PGsl
m
Tooth feedrate (G95 FZ) (Page 153)
Tables
16.1 Instructions
473