Motion Commands - Siemens SINUMERIK 828D Programming Manual

Motion commands

9.2 Travel commands with Cartesian coordinates (G0, G1, G2, G3, X..., Y..., Z...)
Example
Program code
N10 G17 S400 M3
N20 G0 X40 Y-6 Z2
N30 G1 Z-3 F40
N40 X12 Y-20
N50 G0 Z100 M30
196
Comment
; Selection of the working plane, spindle clockwise
; Approach of the starting position specified with Cartesian
coordinates in rapid traverse
; Activation of the linear interpolation, feed of the tool
; Travel on an inclined line to an end position specified
with Cartesian coordinates
; Retraction in rapid traverse for tool change
Programming Manual, 07/2010, 6FC5398-1BP40-0BA0
Fundamentals